Project Overview: Chenab Valley Power Projects Pvt Ltd a joint venture company of NHPC Ltd. and JKSPDC Ltd. plans to develop a 540 MW(4*135) power project in Village Padyarna in District Kishtwar, Union Territory of Jammu & Kashmir. Patel Engineering Ltd. has completed the mobilization of equipment at the site. Boring works for HRT and TRT are in progress. The owner has floated tender for seeking finiancial institution to fund the project(2025_CVPP_868122_1) and Indian Bank, HUDCO Ltd, PFC, REC and J&K Bank are the major contenders in financial bid. OM infra has been selected as a HM package(2023_CVPP_769305_1) contractor and PSE Engineers, TAXMACO were the major contenders in price bids. Bid evaluation is in progress for the electro-mechanical works package. BHEL, GE, Voith, Antriz, and Alstom are the major contenders in the electro-mechanical works package.The preparation of the tender is in progress for sub-station works and its specification finalization is yet to be completed. The project requirements are DG sets, bending and cutting machines, fuel/water tankers, EOT cranes, mobile cranes, air compressors, tunnel boring machines, dozers, piles, elevators, building supports, gantry crane, spillway radial gates and hydraulic hoists, spillway stop logs, discharge pipe, valves, main inlet, intake trash rack, intake fixed wheel gates, desilting chamber gate, surge shaft gates, draft tube gate, trash rack cleaning machine, sluice gates, penstock, actuation system, flap gates, Francis turbine, pumps, spiral, casing, runner blades, guide vanes, oil pressure unit, water seal and air seal, generator and its control panel, guide bearings, transformer, battery bank, SCADA, unit control board, sensors, console, display panels, gas insulated switch-gear, cables, transmission lines, nozzles, among others

27/02/2023
Chenab Valley Power Projects Pvt Ltd a joint venture company of NHPC Ltd. and JKSPDC Ltd. plans to develop a 540 MW(4*135) power project in Village Padyarna in District Kishtwar, Union Territory of Jammu & Kashmir. Patel Engineering Ltd. has completed the mobilization of equipment at the site. Boring works for HRT and TRT are in progress. GMW, Texmaco, PSE Engineers, and Patel Engg. are the major contenders in price bids.LOA for HM works is expected by Q2 2023. Bid evaluation is in progress for the electro-mechanical works package. BHEL, GE, Voith, Antriz, and Alstom are the major contenders in the electro-mechanical works package. The EOT crane tender has been delayed. The preparation of the tender is in progress for sub-station works and its specification finalization is yet to be completed. The project requirements are DG sets, bending and cutting machines, fuel/water tankers, EOT cranes, mobile cranes, air compressors, tunnel boring machines, dozers, piles, elevators, building supports, gantry crane, spillway radial gates and hydraulic hoists, spillway stop logs, discharge pipe, valves, main inlet, intake trash rack, intake fixed wheel gates, desilting chamber gate, surge shaft gates, draft tube gate, trash rack cleaning machine, sluice gates, penstock, actuation system, flap gates, Francis turbine, pumps, spiral, casing, runner blades, guide vanes, oil pressure unit, water seal and air seal, generator and its control panel, guide bearings, transformer, battery bank, SCADA, unit control board, sensors, console, display panels, gas insulated switch-gear, cables, transmission lines, nozzles, among others.

14/10/2022
Chenab Valley Power Projects Private Limited a joint venture company of NHPC Ltd. and JKSPDC Ltd. has planned to develop 540 MW(4*135) in Village Padyarna in District Kishtwar, Union Territory of Jammu & Kashmir. Patel Engineering Pvt. Ltd. has been selected as a contractor for the civil and HM package. The contractor has completed the mobilization of equipment at the site. Boring works are in progress for the head race tunnel. Price bids are in progress for electro-mechanical works and in the same package Voith Hydro, BHEL, GE Power, ANTRIZ, and Alstom are the major contenders in the price bid.LOA for the EM package is likely to be on November 2022. The tender has been floated for the EOT crane package and in the same package BHEL, CAT, and Komatsu, L&T, are the major contenders in the price bid. Preparation of tender is in progress for the EPC package for the power transmission line works and its technical specification is yet to be finalized. Further bids are expected soon. The project requirements are to load cum excavator, hydraulic excavator, dumpers, jack hammer, water sprinkler machine, aggregate crushing plant, grouting pump, needle vibrator, air water jet blaster, drilling machines, DG sets, bending and cutting machine, fuel/water tankers, EOT crane, mobile crane, air compressor, tunnel boring machine, dozers, piles, elevators, building supports, gantry crane, spillway radial gates and hydraulic hoists, spillway stop logs, discharge pipe, valves, main inlet, intake trash rack, intake fixed wheel gates, desilting chamber gate, surge shaft gates, draft tube gate, trash rack cleaning machine, sluice gates, penstock, actuation system, flap gates, Francis turbine, pumps, spiral, casing, runner blades, guide vanes, oil pressure unit, water seal and air seal, generator and its control panel, guide bearings, protection relays, transformer and its auxiliaries, lightning arrester panels, excitation system and its auxiliaries, battery bank, SCADA, unit control board, sensors, console, display panels, gas insulated switch-gear and its auxiliaries - circuit breakers, isolators, capacitor bank, dis-connectors, governor panel, cables, transmission lines, nozzles, among others.

01/08/2022
Chenab Valley Power Projects Private Limited a joint venture company of NHPC Ltd. and JKSPDC Ltd. has planned to develop 540 MW(4*135) in Village Padyarna in District Kishtwar, Union Territory of Jammu & Kashmir. Patel Engineering Pvt. Ltd. is an EPC contractor for the civil and HM package. The Electro-mechanical package tender was floated for the EM package(lot-III) and bidding for the same is in progress. Price bids are in progress in which Voith Hydro, BHEL, GE Power, ANTRIZ, and Alstom are the major contenders in the same package. Civil works contractors have completed the mobilization at the site and the excavation activity at the site is in progress. Scope of works for the EM package includes design, manufacture, supply, erection, testing, commissioning of the turbine, generator, auxiliary equipment,400kV GIS, 400kV pothead yard equipment, etc. Preparation of tender is in progress for the EOT crane package and its tender specification finalization is about to complete. Further bids are expected soon. The project requirements are to load cum excavator, hydraulic excavator, dumpers, jack hammer, water sprinkler machine, aggregate crushing plant, grouting pump, needle vibrator, air water jet blaster, drilling machines, DG sets, bending and cutting machine, fuel/water tankers, EOT crane, mobile crane, air compressor, tunnel boring machine, dozers, piles, elevators, building supports, gantry crane, spillway radial gates and hydraulic hoists, spillway stop logs, discharge pipe, valves, main inlet, intake trash rack, intake fixed wheel gates, desilting chamber gate, surge shaft gates, draft tube gate, trash rack cleaning machine, sluice gates, penstock, actuation system, flap gates, Francis turbine, pumps, spiral, casing, runner blades, guide vanes, oil pressure unit, water seal and air seal, generator and its control panel, guide bearings, protection relays, transformer and its auxiliaries, lightning arrester panels, excitation system and its auxiliaries, battery bank, SCADA, unit control board, sensors, console, display panels, gas insulated switch-gear and its auxiliaries - circuit breakers, isolators, capacitor bank, dis-connectors, governor panel, cables, transmission lines, nozzles, among others.

19/05/2022
Chenab Valley Power Projects Private Limited a joint venture company of NHPC Ltd. and JKSPDC Ltd. has planned to develop 540 MW(4*135) in Village Padyarna in District Kishtwar, Union Territory of Jammu & Kashmir. Megha Engineering Pvt. Ltd. is an EPC contractor for the civil and HM package. The Electro-mechanical package tender was floated for the EM package(lot-III) and bidding for the same is in progress. Techno-commercial biddings were completed in which Voith Hydro, BHEL, GE Power, ANTRIZ, and Alstom are the major contenders in the same. Civil works contractors have completed the mobilization at the site and the excavation activity at the site is just started. Scope of works for the EM package includes design, manufacture, supply, erection, testing, commissioning of the turbine, generator, auxiliary equipment,400kV GIS, 400kV pothead yard equipment, etc. Preparation of yet to start for the EOT crane package. Further bids are expected soon. The project requirements are to load cum excavator, hydraulic excavator, dumpers, jack hammer, water sprinkler machine, aggregate crushing plant, grouting pump, needle vibrator, air water jet blaster, drilling machines, DG sets, bending and cutting machine, fuel/water tankers, EOT crane, mobile crane, air compressor, tunnel boring machine, dozers, piles, elevators, building supports, gantry crane, spillway radial gates and hydraulic hoists, spillway stop logs, discharge pipe, valves, main inlet, intake trash rack, intake fixed wheel gates, desilting chamber gate, surge shaft gates, draft tube gate, trash rack cleaning machine, sluice gates, penstock, actuation system, flap gates, Francis turbine, pumps, spiral, casing, runner blades, guide vanes, oil pressure unit, water seal and air seal, generator and its control panel, guide bearings, protection relays, transformer and its auxiliaries, lightning arrester panels, excitation system and its auxiliaries, battery bank, SCADA, unit control board, sensors, console, display panels, gas insulated switch-gear and its auxiliaries - circuit breakers, isolators, capacitor bank, dis-connectors, governor panel, cables, transmission lines, nozzles, among others.

04/02/2022
Chenab Valley Power Projects Private Limited a joint venture company of NHPC Ltd. and JKSPDC Ltd. has planned to develop 540 MW(4*135) in Village Padyarna in District Kishtwar, Union Territory of Jammu & Kashmir. Earlier owner floated tender for EM works package and selected Megha Engineering Pvt. Ltd. as a contractor for the HM package. The owner has also floated tenders for the Electro-mechanical Package but the tender was annulled due to a price issue. A fresh new tender was floated for EM package(lot-III) and bidding for the same is in progress. Civil works contractors have started the contractor's activity for the same.HM works contractors have started the mobilization of equipment at the site. Scope of works for the same includes design, manufacture, supply, erection, testing, commissioning of the turbine, generator, auxiliary equipment,400kV GIS, 400kV pothead yard equipment, etc. Preparation of yet to start for EOT crane package. Further bids are expected soon. The project requirements are to load cum excavator, hydraulic excavator, dumpers, jack hammer, water sprinkler machine, aggregate crushing plant, grouting pump, needle vibrator, air water jet blaster, drilling machines, DG sets, bending and cutting machine, fuel/water tankers, EOT crane, mobile crane, air compressor, tunnel boring machine, dozers, piles, elevators, building supports, gantry crane, spillway radial gates and hydraulic hoists, spillway stop logs, discharge pipe, valves, main inlet, intake trash rack, intake fixed wheel gates, desilting chamber gate, surge shaft gates, draft tube gate, trash rack cleaning machine, sluice gates, penstock, actuation system, flap gates, Francis turbine, pumps, spiral, casing, runner blades, guide vanes, oil pressure unit, water seal and air seal, generator and its control panel, guide bearings, protection relays, transformer and its auxiliaries, lightning arrester panels, excitation system and its auxiliaries, battery bank, SCADA, unit control board, sensors, console, display panels, gas insulated switch-gear and its auxiliaries - circuit breakers, isolators, capacitor bank, dis-connectors, governor panel, cables, transmission lines, nozzles, among others.

LOA for EM works package is expected by December 2026

27/02/2023
RFQ for the S/S works package is likely to be floated in April 2023.

14/10/2022
RFQ for the EPC package for the transmission line works package is likely to be floated in December 2022.

01/08/2022
RFQ for the EOT crane package is likely to be floated in September 2022.

19/05/2022
RFQ for the EOT crane package is likely to be floated in July 2022.

04/02/2022
RFQ for the EOT crane package is likely to be floated in April 2022.